The Center for Workforce Development at 含羞草社区 has gathered intel from organizations within the region over the past two years to procure the training offerings shown below. These are industry-relevant pieces of training that will upskill your existing employees or orient new hires for success.听Additionally, because the programs are online, you can start any time and progress as quickly or conservatively based on what works for your schedule. Once registered, you’ll receive a welcome email with instructions, including a suggested timeline for completion. We work with you to ensure your success online, on the job and in the classroom!
Select the workforce development training that best meets your or your employee’s needs from these quality programs:
AC/DC Electrical Systems
Fee for the Entire Course: $1,700
# of Individual Classes within this Course: 6
Fee for Each Individual Class: N/A
Offered in Spanish? No
Course Description:
AC/DC Electrical course teaches fundamentals of AC/DC electrical systems used for power and control in industrial, commercial, agricultural, and residential applications using virtual training technology. Students learn industry-relevant skills included in subject areas such as Basic Electrical Circuits, Electrical measurement, Circuit Analysis, Inductance and Capacitance, Combination Circuits, and Transformers. Participants will be able to practice and test their skills utilizing our AC/DC electrical systems trainer (refers to 990-ACDC1).
Listing of Classes Within the Course:
- Basic Electrical Circuits
- Electrical Measurements
- Circuit Analysis
- Inductance and Capacitance
- Combination Circuits
- Transformers
Blueprint Reading
Fee for the Entire Course: $150
# of Individual Classes within this Course: 1
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
Blueprint reading introduces reading and interpreting blueprints with a focus on reviewing common elements, the alphabet of lines, and the differences between types of drawings. Also provides dimension definitions for height, width, and depth, and reviews dimension and geometric symbols and datums. Enhances the learner鈥檚 math and geometry knowledge through practical application.
Listing of Classes Within the Course:
- Blueprint Lines
Computer Aided Design 1 (SolidWorks)
Fee for the Entire Course: $720
# of Individual Classes within this Course: 6
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
SolidWorks 2024 introduces solid modeling by describing the function of solid modeling software and the features of solid modeling. Solid model creation is described and applies the knowledge taught by having the learner use sketch commands and tools to create a sketch and extruded boss/base features to create a solid model. Solid Model features such as drawing planes, extrude cut features, fillets and chamfers, and revolved features are explored. Also included are topics such as multi-view drawings, dimensioning, and title blocks.
Listing of Classes Within the Course:
- Intro into Solid Modeling
- Solid Model Creation
- Extruded Features
- Solid Model Fillets & Chamfers
- Solid Model Revolved Features
- Production Drawings
Computer Aided Design 2 (SolidWorks)
Fee for the Entire Course: $840
# of Individual Classes within this Course: 7
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
SolidWorks 2024 introduces 3D Assemblies by describing the function of a 3D assembly, how to create a 3D assembly, how to fix and float components, standard mates and component manipulation, and smart-mates and mate editing. Also discussed is Advanced mates which defines advanced mates and exploded views and gives learners the fundamentals to design a 3D assembly using advanced mates, create an exploded view of an assembly, and create an exploded view drawing from a 3D assembly. Also introduced is SolidWorks Animations which covers exploded assembly animation, assembly motion automated tools, and assembly motion timeline manual tool.
Listing of Classes Within the Course:
- Intro into 3D Assemblies
- Standard Mates & Component Manipulation
- SmartMates & Mate Editing
- Advanced Mates
- Exploded Assemblies
- Exploded View Drawings & Animation
- Assembly Motion
Computer Aided Manufacturing 1
Fee for the Entire Course: $480
# of Individual Classes within this Course: 4
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
Computer-Aided Manufacturing 1 introduces you to Computer-Aided manufacturing by describing its function, CAM part geometry, and CAM-Mill process. (96-CAM1)
Listing of Classes Within the Course:
- Introduction to CAM-Mill
- Contour CAM Toolpath
- CAM Parameters
- Making Parts with CAD/CAM
Contamination Prevention Training/Component Cleaning Methods
Fee for the Entire Course: $240
# of Individual Classes within this Course: 2
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
Contamination teaches key aspects of preventing and controlling contamination. Learners acquire skills in identifying and measuring contamination as well as prevention practices such as facility layout, cleanliness, and component handling. Provides a solid knowledge base in fluid handling and storage as well as use of clean rooms.
Listing of Classes Within the Course:
- Contamination Control Concepts
- Contamination Prevention
EV Battery Manufacturing
Fee for the Entire Course: $2,400
# of Individual Classes within this Course: 1
Fee for Each Individual Class: N/A
Offered in Spanish? No
Course Description:
In addition to key learning in multiple core disciplines (fluid power, automation, safety, electrical), this battery manufacturing program contains courses built around the specifics of EV battery production. Those topics include the following:
- Battery Basics – classification of batteries, components of a single cell, lithium-ion and lead acid batteries, basic battery chemistry and physics, battery capacity and energy, and the importance of battery testing.
- Battery Power Converters – the components of a battery system, battery management systems topologies, types of switched power converters, battery losses and efficiency, and total system energy efficiency.
- Battery Safety Considerations – battery storage policies, battery standards and regulations, and functional safety and security.
- Battery Applications – both stationary and mobile applications of batteries, including battery-powered consumer electronics, home storage, charging infrastructure, and more.
- End of Life (Recycling) – dismantling a battery pack, reuse and recycling processing, including both physical and hydrometallurgical processing.
Listing of Classes Within the Course:
- EV Battery Manufacturing
Hydraulics - Basic Troubleshooting
Fee for the Entire Course: $850
# of Individual Classes within this Course: 4
Fee for Each Individual Class: $250
Offered in Spanish? No
Course Description:
This course blends eLearning with an in-person, hands-on component for the best learning outcomes. It will cover major topics like troubleshooting hydraulic systems, pumps, actuators, and valves, including directional control valves. Specifically, learners will study objectives such as: types of in-circuit component tests; symptoms and causes of directional control valve failure; inspecting and troubleshooting a pilot-operated check valve; and troubleshooting a pressure change problem in a multiple pressure circuit. Participants will be able to practice and test their skills utilizing our hydraulic equipment (refers to Model 950-HTB1).
Listing of Classes Within the Course:
- Hydraulic Pump Troubleshooting
- Troubleshooting Hydraulic Actuators & DCVs
- Troubleshooting Hydraulic Valves
- Troubleshooting Hydraulic Systems
Principles of Hydraulics
Fee for the Entire Course: $150
# of Individual Classes within this Course: 1
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
Principles of hydraulics introduces the theory and application of hydraulics in manufacturing. The learner studies the fundamentals of hydraulic theory; the form, fit, and function of components of a hydraulic system; common applications of hydraulics in manufacturing; and how to safely operate and maintain hydraulic systems.
Listing of Classes Within the Course:
- Introduction to Hydraulic Systems
Lockout/Tagout
Fee for the Entire Course: $150
# of Individual Classes within this Course: 1
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
This course covers the basics of lockout/tagout. The course begins with the dangers of hazardous energy, how to use lockout/tagout to safeguard a machine, and the requirements for an Energy-Control Program (ECP).
Listing of Classes Within the Course:
- Lockout/Tagout
PLC - Programmable Logic Controller (with in-person, hands-on component)
Fee for the Entire Course: $3,480
# of Individual Classes within this Course: 29
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
This course blends eLearning with an in-person, hands-on component for the best learning outcomes. It covers PLC (Programmable Logic Controller) programming, operation, and applications used in industry. This course covers a wide variety of program commands, ranging from timers and contacts, stepper motor control, and PWM control that will quickly develop relevant and critical skills to be job ready in modern industry environments. Participants will be able to practice and test their skills utilizing our PLC equipment (references: 990-PAB53A).
Listing of Classes Within the Course:
- Intro to Programmable Controllers
- PC-PLC Connections
- Controller Operation
- Panelview Plus Terminal-PLC Connections & Projects
- Panelview Plus Terminal Operation
- PLC Programming
- PLC Memory Organization
- Project Creation & Organization
- Programming Software, Analysis & Documentation
- PLC Motor & Variable Speed Drive Control Basics
- Data Types, User-Defined Tags & Interlock Functions
- Timer Instructions & Time-Driven Sequencing
- Counter Instructions
- Event Sequencing
- Program Initialization & Master Control Reset
- Subroutines
- Math & Data Move Instructions
- FactoryTalk View Studio 鈥� Machine Edition
- Application Displays & Objects
- Panelview Plus Application Editing
- Alarms, Diagnostic & Information Messages
- Analog Inputs 鈥� Sensors
- Analog Input Default Configuration & Operation
- Analog Input Tag Structures & Parameterization
- Comparison Instructions & On/Off Control
- Analog Output Devices & Modules
- Analog Output Configuration
- Variable Speed Drives & PWM Temperature Control
- Stepper Motor Control
Pneumatic Troubleshooting (with in-person, hands-on component)
Fee for the Entire Course: $1450
# of Individual Classes within this Course: 7
Fee for Each Individual Class: $250
Offered in Spanish? No
Course Description:
This course blends eLearning with an in-person, hands-on component for the best learning outcomes. It provides a strong understanding of troubleshooting areas such as air preparation, pneumatic cylinders, motor and rotary actuator, directional control and flow control valves, and more! Learners will study topics like: symptoms of filter failure; the operation of a rodless cylinder; the function of a shock absorber; symptoms of exhaust restrictor failure; the operation of a vacuum switch; and the construction of a troubleshooting flow chart. Participants will be able to practice and test their skills utilizing our pneumatic equipment (refers to 950-PT1).
Listing of Classes Within the Course:
- Intro to Pneumatic Troubleshooting
- Air Preparation Troubleshooting
- Troubleshooting Pneumatic Cylinders
- Motor & Rotary Actuator Troubleshooting
- Troubleshooting DCV & Flow Control Valves
- Troubleshooting Vacuum Systems
- Troubleshooting Pneumatic Systems
Print Reading 1 for Manufacturing
Fee for the Entire Course: $360
# of Individual Classes within this Course: 3
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
Print Reading 1 for Manufacturing introduces print reading by describing the function of a print and methods to interpreting print drawings. It also covers multi-view drawings, sectional drawings, fasteners, and assembly drawings. Basic dimensioning is also introduced describing its function and features which will lead you to the advanced dimensioning, and geometric dimensioning and tolerancing.
Listing of Classes Within the Course:
- Multiview Drawings
- Sectional Drawings & Fasteners
- Geometric Dimensioning & Tolerancing
Quality Assurance & Measurement 1
Fee for the Entire Course: $1,320 plus measuring tools cost.
# of Individual Classes within this Course: 11
Fee for Each Individual Class: $150 plus measuring tools cost.
Offered in Spanish? Yes
Course Description:
This course includes learning skills in gauging systems including: Metric/English conversion, metric rule, tape measure, measurement conversion, dial caliper, digital caliper, micrometer, gauging, indicator measurement, modular gauge measurement, data collection, statistical concepts, SPC software, control chart operation, control chart analysis, SPC problem solving, modular gauging techniques, geometric dimensioning and tolerance methods, measurement and specifications of location, orientation, and form tolerances, circularity, roundness, straightness, perpendicularity, parallelism, check sheets, computerized data collection, pareto charts and histograms.
Listing of Classes Within the Course:
- Basic Measurement
- Precision Measurement Tools
- Dimensional Gauging
- Introduction to SPC
- Control Chart Operation
- Control Chart Analysis
- SPC Problem Solving
- Geometric Dimensioning & Tolerancing
- Location Tolerances
- Orientation Tolerances
- Form Tolerances
Principles of Robotics
Fee for the Entire Course: $840
# of Individual Classes within this Course: 7
Fee for Each Individual Class: $150
Offered in Spanish? Yes
Course Description:
This course begins with basic robot operation and programming before moving to interfacing, material handling, application development, flexible manufacturing cells, quality control, and production control.
Listing of Classes Within the Course:
- Basic Robot Operation
- Basic Robot Programming
- Interfacing & Material Handling
- Application Development
- Flexible Manufacturing Cells
- Quality Control
- Production Control
Refunds for workforce development programs, unless otherwise noted on the specific program page, are available at 100% up to 7 days in advance of the start date of the program. Refund requests received 6 or fewer days before the start date of the program, or any time after the start date of the program, will not be approved.